SMDR on Mitel MXe Server Printer Port

[august]

I have a customer with two 3300MXeIII and one MXe Server.

the customer want to have the SMDR on a serial port, not on a TCP IP Port.

I know I can output the SMDR to the serial port of the MXeIII, but I'm not sure I can use the printer port of the Mxe Server since this port is used to configured the MSL.

So can I output the SMDR on the printer port, if not, is there another way to do it without using an ip to serial port converter?

[ralph]

Do you happen to have an IP 5550 console in the network?
I'm thinking I may have done this once that way.

Ralph

[august]

No I don't.  I only have 5330 Ip phones.

[bobcheese]

You can use the serial port on the pc of a 5550 or you could by a serial to ip converter. I use the precidia ipocket this telnets to the MXe SMDR port and then outputs on a 9way serial connection

[ralph]

Thanks bobcheese for the tip.

Here's the link for the Precidia iPocket


 www.precidia.com/products/ipocket_232.html

Ralph
www.aavoicepro.com