« previous next »
Pages: 1 [2]   Go Down

Author Topic: 3300 does not send back G.711 in 200 OK  (Read 13099 times)

Offline brantn

  • Sr. Member
  • ****
  • Posts: 270
  • Karma: +6/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #15 on: June 17, 2011, 03:03:06 PM »
From my reading he was speaking of running it from the Mitel platform as he can run from the softphone platform. And yes I meant to say G729/T.38 but the OP was looking for G711 so the licenses are unneeded a dsp typically would not be needed either unless more resources are needed on the system.
Logged

Offline mav

  • Jr. Member
  • **
  • Posts: 60
  • Country: england
  • Karma: +0/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #16 on: June 17, 2011, 03:06:04 PM »
Before you spend too much time on this you may want to check that Mitel actually support this config...
Logged

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #17 on: June 17, 2011, 04:20:31 PM »
Your right it was the first line in the post

From the PBX in the middle can you do a wireshark and see if you are getting audio from both sides?
Logged

Offline brantn

  • Sr. Member
  • ****
  • Posts: 270
  • Karma: +6/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #18 on: June 18, 2011, 12:06:58 AM »
Yeah that is really the only way to look at sip signalling as you can see the whole packet at lot of PBX try building this in but they only show certain items and in a summary way.
Logged

Pages: 1 [2]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10