Author Topic: MSL network setting problem  (Read 3276 times)

Offline maxcheung

  • Contributer
  • *
  • Posts: 9
  • Karma: +0/-0
    • View Profile
MSL network setting problem
« on: January 06, 2011, 06:16:26 AM »
I have a problem about the server,  I try to change my network setting on system console, the system show the follow error,
“no Ethernet adapters found which a compatible with this version of MAS base”

The server only setup with MSL and UCA , it was work before.

I have two Server. Model is IBM M3650 M3, one was install MAS, another was install MSL with UCA, the MAS is work pretty good, and Server’s NIC card is embedded, it was work before, can I only reinstall the MSL or NIC card's driver and keep the UCA setting? Or any suggestion? Thank you!


Offline maxcheung

  • Contributer
  • *
  • Posts: 9
  • Karma: +0/-0
    • View Profile
Re: MSL network setting problem
« Reply #1 on: January 26, 2011, 06:28:01 AM »
This is my Network card problem, solved, thanks all.  ;D

Offline abonabeel

  • Contributer
  • *
  • Posts: 25
  • Karma: +0/-0
    • View Profile
Re: MSL network setting problem
« Reply #2 on: September 12, 2011, 09:03:23 AM »
Hi I have the same problem.

Could you please help?

regards

Mohammed


 

Sitemap 1 2 3 4 5 6 7 8 9 10