Author Topic: Double Ring  (Read 5436 times)

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Double Ring
« on: January 10, 2011, 02:21:34 PM »
I've banged my head a bit on the wall on this.  I must be loosing it.

3300 MXe with MXe gateway.  Ver 9.0  PRI trunks

I've got a customer where they tell me the double ring for outside calls have stopped.
They want it back.
I thought it was just a COS mark "External Trunk Standard Ringback".   Should be "No."

I've gone through the COS of the PRI trunks on the gateway controller
The IP trunks COS  - both controllers
The COS of the stations them selves.   All have "External Trunk Standard Ringback" set to no.

I've got to be missing something - don't know what.

Anyone got an idea?

Ralph







« Last Edit: March 31, 2014, 08:36:41 AM by ralph »


Offline Mitel100

  • Sr. Member
  • ****
  • Posts: 262
  • Country: gb
  • Karma: +6/-0
    • View Profile
Re: Double Ring
« Reply #1 on: January 10, 2011, 04:52:39 PM »
Hi Ralph, in system options ensure that the option Ringing Cadence for Tie Line Calls is set to external.

Also a note from the docs is:

Select "Internal" to indicate that a single ringing cadence is to simulate an internal call or "External" to indicate that a double ringing cadence is to simulate an external call.

Enabling External Trunk Standard Ringback in the COS overrides this setting.


Hope this helps

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Double Ring
« Reply #2 on: January 11, 2011, 09:01:53 AM »
Thanks Mitel100,
I had actually checked that yesterday before my posting but went back again to re-verify.
System options is set to external.
All COS's involved are all set to "no".

I'm baffled.  I'm sure it's something stupid I've overlooked (it usually is) but I've no idea where.
Not much in the docs on this.
I wonder if (1) there's something in the PRI programming I've missed or (2) can the carrier provide the ringback?

Ralph
« Last Edit: March 31, 2014, 08:35:40 AM by ralph »

Offline bobcheese

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +3/-0
    • View Profile
Re: Double Ring
« Reply #3 on: January 13, 2011, 08:13:24 AM »
may seem a silly question but when was the last reboot of the controller? I have seen strange things happen on R8/9 systems that have not been rebooted for a while.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Double Ring
« Reply #4 on: January 17, 2011, 04:10:38 PM »
I haven't rebooted yet, it's kind of a stressful event for this customer.

But I have a new question:
Is it possible that a carrier can provide/override the ring back tone on a PRI?

Ralph

« Last Edit: March 31, 2014, 08:35:57 AM by ralph »

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Double Ring
« Reply #5 on: January 21, 2011, 10:33:40 AM »
Still haven't rebooted.....   
But..
Mitel Tech support hasn't been able to make it work in their lab.

I don't feel so bad now.

Ralph
« Last Edit: March 31, 2014, 08:36:10 AM by ralph »

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: Double Ring
« Reply #6 on: March 07, 2011, 02:22:50 PM »
Ralph,
Did you ever get a fix for this?

I have a customer who is having the opposite issue. Its doing the double ring, and yet the COS for the PRI has "External Trunk Standard Ringback" set to yes.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Double Ring
« Reply #7 on: March 07, 2011, 02:54:06 PM »
No.  Never got it fixed.  The customer decided it wasn't that big of deal.
Funny.  Mitel tech support couldn't figure it out in their lab either.

Ralph

« Last Edit: March 31, 2014, 08:36:22 AM by ralph »


 

Sitemap 1 2 3 4 5 6 7 8 9 10