« previous next »
Pages: [1]   Go Down

Author Topic: SIP INCOMMING CALLS  (Read 2478 times)

Offline dh_lab

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +0/-0
    • View Profile
SIP INCOMMING CALLS
« on: November 15, 2010, 01:31:17 PM »
Hi all,
I am having a problem after configuring the SIP Trunk on Mitel....the problem is when  calls to a mitel DID number the caller does not get any ringing tone, but calls receive to a mitel and can communicate with no issues.An one tell me how could i ractify this issue?

System R10.1 ( This i have tested on R8.0 also)


dh
Logged

Offline limamikeseven

  • Contributer
  • *
  • Posts: 27
  • Karma: +0/-0
    • View Profile
Re: SIP INCOMMING CALLS
« Reply #1 on: November 23, 2010, 03:08:13 PM »
Hi,

This will depend on the functionality on the SBC or other system you are connecting to. SIP is a funny animal. I currently have issues whereby no moh or RAD message will play when dialing in on SIP trunks.

Regards
Logged

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: SIP INCOMMING CALLS
« Reply #2 on: November 23, 2010, 04:03:25 PM »
I know there is an option in 4.1 called Avoid Signaling Hold to the Peer I am not sure what release it came out in but try changing that if its available.
Logged

Offline limamikeseven

  • Contributer
  • *
  • Posts: 27
  • Karma: +0/-0
    • View Profile
Re: SIP INCOMMING CALLS
« Reply #3 on: November 29, 2010, 01:20:12 AM »
Have you tried configuring the CPN forms and do you have the options enabled in the relative COS?
Logged

Offline Chakara

  • Hero Member
  • *****
  • Posts: 607
  • Karma: +2/-0
    • View Profile
    • Kyle Petree
Re: SIP INCOMMING CALLS
« Reply #4 on: November 29, 2010, 11:43:06 PM »
  Afeef - please start a different thread as the symptoms of your issue are clearly different.

Thanks!

-Chak
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10