Home Page Articles User Guides News Letter  



Author Topic: Micollab client for mobile  (Read 143 times)

Offline sunspark

  • Sr. Member
  • ****
  • Posts: 352
  • Country: ma
  • Karma: +3/-0
    • View Profile
Micollab client for mobile
« on: January 30, 2018, 09:42:34 AM »
Hi guys,

I have some issues with micollab client for mobile android + iPhone

Micollab client in lan mode
Mbg 1 in dmz1
Mbg 2 in dmz 2

Micollab Mbg + mbg1 + mbg2 in a cluster.

When i open the application it works , but when i switch to another application or i let the application in the background after 1 minute

, Softphone shows "Registration lost" 

I have to leave the application or OFF/On ,  then open it back to make it works

Micollab client V8
Micollab server in V7.3

I'm not sure if i upgrade the server to the last version 8 . it will resolve this case.

If someone have the same issue , or if some one can  give me the android apk in V7 to test . i will appreciate.

Cheers.


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2708
  • Country: us
  • Karma: +65/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Micollab client for mobile
« Reply #1 on: January 30, 2018, 12:17:13 PM »
We used to see this with Samsung Android devices that have VoLTE service... not sure why. On WiFi it was always fine, but on mobile data it we had similar issues. There never was a solution except to disable VoLTE.

Offline sunspark

  • Sr. Member
  • ****
  • Posts: 352
  • Country: ma
  • Karma: +3/-0
    • View Profile
Re: Micollab client for mobile
« Reply #2 on: January 30, 2018, 12:24:04 PM »
We used to see this with Samsung Android devices that have VoLTE service... not sure why. On WiFi it was always fine, but on mobile data it we had similar issues. There never was a solution except to disable VoLTE.


The support recommend to upgrade Micollab to V8 and Mbg to V10


Offline StevenH510

  • Contributer
  • *
  • Posts: 10
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: Micollab client for mobile
« Reply #3 on: February 13, 2018, 05:14:50 PM »
Hi there,

We've also seen the same with our Samsung devices, but they are running on Android 5.1.1.

On our LG devices with Android v7 on with MiCollab running on 5GHz Wifi and 4G, we haven't seen a problem in testing so far, although it really does depend on cellular coverage.

One fix I looked at for this but was more complex, was create a VPN tunnel from the device onto a OpenVPN server with an always on connection, this helped us in the sense it was purely using cell data for MiCollab but the connection was always open, so it wasn't dropping. Not a perfect solution, but if you have the tools available it's a good experiment, plus it gives you a kind of MDM facility too.

Cheers

Steve


 

Sitemap 1 2 3 4 5 6 7 8 9