Author Topic: MBG Help File Download Failed  (Read 1772 times)

Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 667
  • Country: us
  • Karma: +15/-0
    • View Profile
MBG Help File Download Failed
« on: November 13, 2017, 08:16:56 AM »
Occasionally I see this alarm on our MBG:

Application   : MBG
Event Type   : file download failed
Value      : [ip address of 3300 (various]]/help5340_en.spx
Severity   : major
Description   : comment:Download of file failed, icp:[ip address of 3300 (various)]

Download of the help file failed it appears. But why? And how do I, or how can I stop it?


Offline dilkie

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 324
  • Karma: +11/-0
    • View Profile
Re: MBG Help File Download Failed
« Reply #1 on: November 13, 2017, 08:37:34 AM »
looks like your MBG can't reach your icp's tftp ports (20001/udp, 69/udp) to download files needed by some of your sets.

unless this is just a temporary situation (3300 rebooted or something).

Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 667
  • Country: us
  • Karma: +15/-0
    • View Profile
Re: MBG Help File Download Failed
« Reply #2 on: November 13, 2017, 09:15:54 AM »
It's not temporary, but it's not constant either. I might see it happen 3-4 times a week. No one ever seems to go offline.

I will check those ports, thank you for that suggestion.

Offline dilkie

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 324
  • Karma: +11/-0
    • View Profile
Re: MBG Help File Download Failed
« Reply #3 on: November 13, 2017, 11:28:37 AM »
interesting... it sorta points to a network issue between mbg and your icp's.

you can lower the severity of that alarm and make the noise go away.

Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 667
  • Country: us
  • Karma: +15/-0
    • View Profile
Re: MBG Help File Download Failed
« Reply #4 on: November 15, 2017, 10:35:57 AM »
I will probably turn the severity down on this one, but for anyone doing research I ran a basic connectivity test in Administration > Diagnostics and in this particular case the firewall wasn't blocking anything - at least at the time I ran the diagnostic.

Successfully contacted ICP "PBX5" on ports:
    UDP port 69, UDP port 20001, TCP port 6800, TCP port 6802, TCP port 3999
Failed on these ports (this is not necessarily a problem):
    TCP port 6801, TCP port 3998



 

Sitemap 1 2 3 4 5 6 7 8 9 10