Author Topic: Nupoint- call flow mailbox  (Read 3679 times)

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 980
  • Country: mx
  • Karma: +16/-1
    • View Profile
Nupoint- call flow mailbox
« on: November 09, 2017, 06:14:30 PM »
Hi guys;

does anyone know how to set up in Nupoint ,  a mailbox to announce only a message and not leave the possibility to the caller to record a message?

Thank you.


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2176
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Nupoint- call flow mailbox
« Reply #1 on: November 09, 2017, 06:58:32 PM »
I would answer with a menu that allows only a single dtmf digit, set all press options to retry and hang up after timeout

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Nupoint- call flow mailbox
« Reply #2 on: November 10, 2017, 07:12:44 AM »
The Call Director thing works fine... But back when they cost you a fortune for the  licenses and before everyone got one with every user licence, we would make a bare bones FCOS for this. FCOS makes Nupoint extremely flexible.

Sent from my Moto G (5) Plus using Tapatalk


Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 980
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Nupoint- call flow mailbox
« Reply #3 on: November 10, 2017, 03:49:18 PM »
To use only message greeting i use fcos6.

Now i have a second issue.

Im not able to forward a call to external destination  in blind transfert.

Any idea?

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Nupoint- call flow mailbox
« Reply #4 on: November 10, 2017, 09:26:02 PM »
To use only message greeting i use fcos6.

Now i have a second issue.

Im not able to forward a call to external destination  in blind transfert.

Any idea?
Does it work if you perform the same operation from an IP set? I assume it does... Then the issue is most likely the COR of the SIP extension in the 3300.

Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 667
  • Country: us
  • Karma: +15/-0
    • View Profile
Re: Nupoint- call flow mailbox
« Reply #5 on: November 13, 2017, 08:13:57 AM »
To use only message greeting i use fcos6.

Now i have a second issue.

Im not able to forward a call to external destination  in blind transfert.

Any idea?

From a Call Director, if you are transferring to an external destination, you should use Alternate Transfer, not Blind Transfer.

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 980
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Nupoint- call flow mailbox
« Reply #6 on: November 13, 2017, 03:38:18 PM »
To use only message greeting i use fcos6.

Now i have a second issue.

Im not able to forward a call to external destination  in blind transfert.

Any idea?

From a Call Director, if you are transferring to an external destination, you should use Alternate Transfer, not Blind Transfer.

Hi Zulualfa

What is the difference bitween alternate and blind transfert?

Thanks

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 980
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Nupoint- call flow mailbox
« Reply #7 on: November 13, 2017, 03:39:46 PM »
To use only message greeting i use fcos6.

Now i have a second issue.

Im not able to forward a call to external destination  in blind transfert.

Any idea?
Does it work if you perform the same operation from an IP set? I assume it does... Then the issue is most likely the COR of the SIP extension in the 3300.

I use a mailbox for as call flow. For me we dont talk about sip extension.

Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 667
  • Country: us
  • Karma: +15/-0
    • View Profile
Re: Nupoint- call flow mailbox
« Reply #8 on: November 14, 2017, 12:32:04 PM »
To use only message greeting i use fcos6.

Now i have a second issue.

Im not able to forward a call to external destination  in blind transfert.

Any idea?

From a Call Director, if you are transferring to an external destination, you should use Alternate Transfer, not Blind Transfer.

Hi Zulualfa

What is the difference bitween alternate and blind transfert?

Thanks

I believe the Alternate Transfer waits for dial tone and allows you to perform another action if the call is not answered. A Blind Transfer will send the call to the destination regardless of status.

Where you put the number I'd also put S+[Digits to Dial]+H where S will flash the switchook and H will put the call on hold while it dials. Sometimes you can just do the number, but sometimes it doesn't work, whereas I always see the S+x+H method work.

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 980
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Nupoint- call flow mailbox
« Reply #9 on: November 14, 2017, 01:07:32 PM »
To use only message greeting i use fcos6.

Now i have a second issue.

Im not able to forward a call to external destination  in blind transfert.

Any idea?

From a Call Director, if you are transferring to an external destination, you should use Alternate Transfer, not Blind Transfer.

Hi Zulualfa

What is the difference bitween alternate and blind transfert?

Thanks

I believe the Alternate Transfer waits for dial tone and allows you to perform another action if the call is not answered. A Blind Transfer will send the call to the destination regardless of status.

Where you put the number I'd also put S+[Digits to Dial]+H where S will flash the switchook and H will put the call on hold while it dials. Sometimes you can just do the number, but sometimes it doesn't work, whereas I always see the S+x+H method work.

I have a wired behavior (aleternate transfer) with or withouy your method.

When i make my choice (example press 1 ) i have 3s music and hold , then the external destination ring 1s (mobile phone ) then stop ringing.

Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 667
  • Country: us
  • Karma: +15/-0
    • View Profile
Re: Nupoint- call flow mailbox
« Reply #10 on: November 14, 2017, 01:45:18 PM »
What is the No Answer Timeout value?

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 980
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Nupoint- call flow mailbox
« Reply #11 on: November 14, 2017, 02:02:49 PM »
To use only message greeting i use fcos6.

Now i have a second issue.

Im not able to forward a call to external destination  in blind transfert.

Any idea?

From a Call Director, if you are transferring to an external destination, you should use Alternate Transfer, not Blind Transfer.

Hi Zulualfa

What is the difference bitween alternate and blind transfert?

Thanks

I believe the Alternate Transfer waits for dial tone and allows you to perform another action if the call is not answered. A Blind Transfer will send the call to the destination regardless of status.

Where you put the number I'd also put S+[Digits to Dial]+H where S will flash the switchook and H will put the call on hold while it dials. Sometimes you can just do the number, but sometimes it doesn't work, whereas I always see the S+x+H method work.

I have a wired behavior (aleternate transfer) with or withouy your method.

When i make my choice (example press 1 ) i have 3s music and hold , then the external destination ring 1s (mobile phone ) then stop ringing.

3 seconds

Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 667
  • Country: us
  • Karma: +15/-0
    • View Profile
Re: Nupoint- call flow mailbox
« Reply #12 on: November 14, 2017, 02:28:07 PM »
I don't think that's giving it enough time to answer before its recalled. I would move it up to 24 or even 30 if you want to allow the mobile voicemail to pick up.

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 980
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Nupoint- call flow mailbox
« Reply #13 on: November 14, 2017, 02:33:38 PM »
Ok. I will try. But if it works. I dont want to keep call in hold 30 seconds. I want to transfert immediatly the call to external destination.

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 980
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Nupoint- call flow mailbox
« Reply #14 on: November 15, 2017, 03:21:17 AM »
I don't think that's giving it enough time to answer before its recalled. I would move it up to 24 or even 30 if you want to allow the mobile voicemail to pick up.

Hi ZuluAlpha,

I changed the no aswer timeout to 30second ( same behavior)

I call from my Mobile1 the mailbox then make choice 1 ( alternate transfer to extrnal destination Mobile2)

Behavior :

After making choice 1 from mobile1 i have continuous music on hold
im mobile2 i have 1second ring then nothing.


 

Sitemap 1 2 3 4 5 6 7 8 9 10