Reboot due to "Code Change"

[NTEDave]

Anyone had reboots caused by a "Code Change" recently, I thought they were a thing of the past!

Got a 6.2 SP2 PR5 doing it monthly ish, sending it over to Mitel TS at the minute but was curious to see if anyone else has had it recently?

[acejavelin]

Haven't seen that one in a while... years ago there were some software bugs that caused that, but other than that the only time I have seen this is corruption/failure of the CF card.

[DND ON]

I've seen "Code Change" reboots that were actually caused by power issues.

[NTEDave]

The system has had a new Compact Flash when I upgraded to 6.2 SP2 PR5, I did go out to site once as the system was completely down and all I needed to do was hit the central button to bring it back up.

Power issues could be the culprit as there is some heavy building work going on near by.

[Tech Electronics]

NTEDave,

Almost every time I have seen that error it was due to power issues.

1. Brown-outs
2. Square-Wave UPS

Thanks,

TE

[NTEDave]

Thanks everyone

The customer now has a quote for a UPS to power the system.

In my defense the system was on a UPS until they built a new comms room and moved all of the servers and UPS's to it leaving the phone system in the old location.