Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dh_lab

Pages: [1] 2 3 4
1
Mitel MiVoice Business/MCD/3300 / screen saver
« on: February 24, 2012, 05:08:39 AM »
is screensaver is free for in mxe 3300 R10.2.0.26_2 or not? i have uploaded it to a 5330 phone but is shows mitel default screensaver. any suggestions??

2
Mitel MiVoice Business/MCD/3300 / Re: 5540 console
« on: February 24, 2012, 05:04:01 AM »
thnks

3
Mitel MiVoice Business/MCD/3300 / 5540 console
« on: February 22, 2012, 11:40:55 PM »
how can enable calling number(internal & external ) before answer the incoming calls,  from other sets 5330, 5312 and 5610 no issues, but 5540 console only can see the calling number once the  calls is answered? any suggestions?

4
Mitel MiVoice Business/MCD/3300 / call waiting
« on: February 16, 2012, 02:18:33 PM »
how i can disable second caller, calling to an DID extensions while extensions on busy......i have tried with camp on blank and this works only on trunk but not an extensions why??

5
Mitel MiVoice Business/MCD/3300 / Re: 3300 Mxe 111 - rebooting
« on: November 18, 2011, 10:27:57 AM »
new things that i installed was DSP 11, Echo daughter, RAID  & 2nd  Processor, one by one i have removed and tested. same error and same thing happened.

6
Mitel MiVoice Business/MCD/3300 / Re: 3300 Mxe 111 - rebooting
« on: November 17, 2011, 03:13:35 PM »
Below are the alarms,
it is the same alarms as brantn mentioned........

Management Layer SUCCESSFULLY started.


Start DHCP service


Start DNS-QryMgr service

0x3d8d140 (tAppStartup): MccDriver::MccSetupParamaters: invalid channels->uLastChannel: 65535

Service Layer Coordinator FAILED to start.

Task StartupHwRst being deleted while ACTIVE
WARNING-System shutdown requested by task: tAppStartup

program
Exception current instruction address: 0x00000000
Machine Status Register: 0x0008b032
Condition Register: 0x20000045
Task: 0x3db4480 "tAppStartup"
xfile: /db/xrtc file ok

ignore dup exception

program
Exception current instruction address: 0x00000000
Machine Status Register: 0x0008b032
Condition Register: 0x20000045
MnTftp:Thread terminate signal received
0x3da91c0 (HwReset): ==> WARNING: System Shutdown about to start. Reset Backup task launched and will force a reset in 2  minutes  if shutdown fails.
0x3da91c0 (HwReset): void SystemShutDown::execute() - SystemShutDown::action.ManagementLayerCoordinator ShutDown started.
Task IPMOTask being deleted while ACTIVE
JLC.stopJavaLayerApp()
JLC.unregisterJavaLayerApp
JLC.stopJavaLayerApp()
JLC.unregisterJavaLayerApp
JLC.stopJavaLayerApp()
JLC.unregisterJavaLayerApp
JLC.stopJavaLayerApp()
JLC.unregisterJavaLayerApp
JLC.stopJavaLayerApp()
JLC.unregisterJavaLayerApp
JLC.stopJavaLayerApp()
JLC.unregisterJavaLayerApp
JLC.stopJavaLayerApp()
JLC.unregisterJavaLayerApp
JLC.stopJavaLayerApp()
NotificationDispatcher shutdown
JLC.unregisterJavaLayerApp
Critical Alarm being raised upon detecting the following task suspended: tAppStartup taskId 0x3db4480 crash time FRI JAN 02 14:00:25 1970

IPN DBA Shutting down!!

program
Exception current instruction address: 0x00000000
Machine Status Register: 0x0008b032
Condition Register: 0x20000045
0x3d92280 (SysPreMort0): MccVerifyChParamaters: ERROR mcc has NOT been initialized
0x3d92280 (SysPreMort0): MccVerifyChParamaters: ERROR mcc has NOT been initialized
0x3d92280 (SysPreMort0): MccVerifyChParamaters: ERROR mcc has NOT been initialized
0x3d92280 (SysPreMort0): MccVerifyChParamaters: ERROR mcc has NOT been initialized
0x3d92280 (SysPreMort0): MccVerifyChParamaters: ERROR mcc has NOT been initialized
Task SysPreMort0 being deleted while ACTIVE
WARNING-System shutdown requested by task: tTMonitor
Raised Critical Alarm on Stale Tasks
RaiseAlarm alarm severity critical, forcing machine shutdown
ERR-Software: 1970/01/02 14:00:48: Main: MnThread.cpp(156): OSA:  Release() - (0x15a81210) User already released this MnThread.

ERR-Software: 1970/01/02 14:00:48: Main: MnThread.cpp(156): OSA:  Release() - (0x15a6ffe8) User already released this MnThread.


dhcpsStop -- complete.
ManagementLayerCoordinator ShutDown completed.

dhcpsStop -- complete.
0x3da91c0 (HwReset): void SystemShutDown::execute() - Calling FileSystemShutDown execute.
!!! HARDWARE RESET REQUEST FROM task HwReset !!!

70/01/02 14:00:55 - HardResetHookExecute called by task: HwReset


End HardResetHookExecute



MITEL SYSTEM ROM R3.1/4 Aug 27 2010 (103 - SOFTWARE_RESET)

7
Mitel MiVoice Business/MCD/3300 / Re: 3300 Mxe 111 - rebooting
« on: November 17, 2011, 11:08:41 AM »
you mean this can be fixed on (MCD 4.2 SP2 PR1-(ICP 10.2.2.15) version??

8
Mitel MiVoice Business/MCD/3300 / Re: 3300 Mxe 111 - rebooting
« on: November 16, 2011, 01:45:17 PM »
how can log into the system while restating.........????

9
Mitel MiVoice Business/MCD/3300 / Re: 3300 Mxe 111 - rebooting
« on: November 16, 2011, 01:06:47 PM »
where i can find the logs?

10
Mitel MiVoice Business/MCD/3300 / 3300 Mxe 111 - rebooting
« on: November 16, 2011, 12:10:34 PM »
any idea why 3300 Mxe 111 keeps on restarting, the software version is R10.2.0.26_2,
I have attached the system alarms.

11
Mitel MiVoice Business/MCD/3300 / SIP Trunk
« on: November 10, 2011, 09:10:50 AM »
any idea how to configure SIP Trunk on Mxe Controller without router, if PABX network range and SIP Trunk network is different.
Example: PABX  IP - 10.10.10.26
                          Net-mask - 255.255.0.0
                          Gateway - 10.10.10.1
                          DHCP - 10.10.10.30 - 10.10.10.50 - 10.10.10.150
               SIP     IP - 192.168.51.50 ( SIP provider recommend to give this IP to a system )
                          Net mask - 255.255.255.0
                          Gateway - 192.168.51.10


thks

12
Mitel MiVoice Business/MCD/3300 / Re: Mitel e2t MAC Address
« on: November 10, 2011, 08:48:39 AM »
Thank you all,
 i found MAC with the lease of dhcp



13
Mitel MiVoice Business/MCD/3300 / 5304
« on: November 02, 2011, 01:57:52 AM »
i like to know in 5304 sets do have screw holes like as 5302 sets to fix on the wall other than its bracket? any one have any idea??

thanx

14
Mitel MiVoice Business/MCD/3300 / Re: Mitel e2t MAC Address
« on: October 31, 2011, 12:00:47 AM »
"showArp" command not available




15
Mitel MiVoice Business/MCD/3300 / Mitel e2t MAC Address
« on: October 30, 2011, 06:06:19 AM »
hi all,
how can check the e2t card mac with command prompt.

thanx

Pages: [1] 2 3 4