Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - johnp

Pages: [1] 2 3 ... 141
1
The automatic update is a crap shut, if they replace switches all hell breaks loose. Think it is better managed via station or base station.

2
Check this out https://wiki.koozali.org/Cron_entry This tells how to make changes survive upgrades. This is based on Mitel Linux i.e e-smith

4
Would need to see under detained users why this fails

5
From what I know this file will be recreated upon the next call, so deleting should not be an issue IMHO

6
Not sure about getting the report emailed, but in theory you could use chown to run a delete file for the stats at midnight and when another call comes in, the file I believe is recreated. These are in /usr/vm/val5/CallFlows/xxxx_yyyy_stats.xml where xxxx... represents the flow desired. It might also make sense to use this file instead of the report. One could at 11:59 have an automated download of it via a sftp client, just prior to reset.

7
If using DID table and trunks can you internal to external, you could change the destination for the numbers to either a speedcall or the full number including dialout digit

8
Mitel Software Applications / Re: Mitel Soft Client
« on: November 26, 2023, 04:05:10 PM »
Just was testing on a new site using phonerlite and tls, connected without issue, where as udp 5060 looks to be restricted by the data vendor there. Did get 5060 tcp to connect but had issues also possibly a firewall thing.

9
Toll plan and cor would be how I might do this

10
Not sure what setting was wrong, let us know

11
I would start by disabling T.38 on the ATA

12
Just had to do a raid hard drive replacement, at a near latest version :-)

13
If it is uboot, looks like this is partition1 or partition 2

14
In theory, you could license this and restore, would have to clear hardware id on AMC. Can then restore original value

15
Mitel MiVoice Business/MCD/3300 / Re: MultiCall Recording Software
« on: September 08, 2023, 05:53:19 PM »
Would need to know controller and how many involved

Pages: [1] 2 3 ... 141