Messages

1

SIP On Mitel / Re: Mitel 5610 and 5000HX controller * tone not getting sent

« on: November 18, 2020, 01:24:51 PM »

Select the payload type value for the SIP Peer from DTMF Decoding Payload drop-down list.
The range of values is 96 - 127. The default value is 96.  This setting has to match what the dtmf payload is set for in the sip base station.  The dect 112 comes set at 112. 

2

MiVoice Office 250/Mitel 5000 / Re: 112 DECT PHONE (UNIVERSAL) AND RFP 12 SINGLE CELL BASE STATION INSTALLATION

« on: December 02, 2019, 11:38:42 AM »

Did you get this figured out?  I've done quite a few of these and have encountered probably every issue. 

3

MiVoice Office 250/Mitel 5000 / Re: SIP DECT 112 Cordless phones. Line question.

« on: April 20, 2018, 11:34:35 AM »

Perfect!  Thank you so much. 

4

MiVoice Office 250/Mitel 5000 / SIP DECT 112 Cordless phones. Line question.

« on: April 20, 2018, 11:22:30 AM »

Is there a way to choose an outgoing line from the phone?  Customer needs to grab a specific line for international calling.  Is there a feature code for this?  Thanks in advance.