Messages

1

Mitel MiVoice Business/MCD/3300 / Re: mitel error

« on: November 13, 2024, 03:01:22 AM »

Can

2

Mitel MiVoice Business/MCD/3300 / Re: mitel error

« on: November 13, 2024, 01:54:19 AM »

error message :

Can’t connect securely to this page
This might be because the site uses outdated or unsafe TLS security settings. If this keeps happening, try contacting the website’s owner.

Your TLS security settings aren’t set to the defaults, which could also be causing this error.

3

Mitel MiVoice Business/MCD/3300 / Re: mitel error

« on: November 13, 2024, 01:52:51 AM »

Software version is 3300 ICP Call Control 38.0.11.6;
when I try to connect thru Internet Explorer Mode (IE11 from Edge) cannot reach the IP address of ICP.
Trying to connect http://ip address, browser response is " this page cannot be open"

4

Mitel MiVoice Business/MCD/3300 / Re: mitel error

« on: November 13, 2024, 01:46:32 AM »

Software version is 3300 ICP Call Control 38.0.11.6;
when I try to connect thru Internet Explorer Mode (IE11 from Edge) cannot reach the IP address of ICP.

Thanks !

5

Mitel MiVoice Business/MCD/3300 / mitel error

« on: November 12, 2024, 06:14:34 AM »

Hi,

Cannot connect to Mitel ICP 3300 with Edge on windows 11.

Thanks !

6

Mitel SX200, SX2000, and older SX platforms / mitel error

« on: August 28, 2024, 06:22:26 AM »

Hallo,

Periodically, PABX MN3300 generates in maintenance logs  a error message:
Source:    OPS Alarms DSA
Description:    ForwardUDTMessageToOPS()->Cannot connect to UDTHANDLER 
What is a problem who generate this message ?

Thanks a lot !

7

Mitel SX200, SX2000, and older SX platforms / PRI card DSU

« on: February 23, 2021, 05:25:31 AM »

Hi,

I cannot disable option NFAS with IMAT 7.6.0.3 !
Thanks a lot !

8

Mitel MiVoice Business/MCD/3300 / Message from 3300 MN

« on: February 08, 2019, 02:31:46 AM »

In 3300 Mitel maintenance logs  i have the message "Handler failed to establish outgoing connection[Error: Timed out.]:STSConTcpHdlr  Handle: 0x987  MiChannel: MI_CHANNEL_SOCKET_TCP_DATA    State: MI_CHANNEL_OPENING    Fd: 422  STSSrvTcpHdlr    Handle: 0x2    MiChannel: " every 5 seconds.
Thanks !

9

Mitel MiVoice Business/MCD/3300 / Re: qsig 3300

« on: January 23, 2019, 07:59:17 AM »

Hi,
Thanks for advice; I did it but system response was: "plid cabinet shelf slot port invalid"
I have an DSU cabinet with PRI card not an embedded digital trunk.

10

Mitel MiVoice Business/MCD/3300 / qsig 3300

« on: January 22, 2019, 11:58:57 AM »

Hi,
I have a qsig digital link to a pabx Alcatel 4400 (DSU, PRI card, QSIG and ISO)
when I call to Alcatel, the call established but after few seconds the call is disconnected
call from Alcatel to mitel is Ok !
have an idea what is going on ?

Thanks a lot !!

11

Mitel MiVoice Business/MCD/3300 / qsi pri dsu

« on: August 08, 2018, 05:14:42 AM »

Hy,
I have one  Mitel 3300 ICP Call Control 38.0.11.6 version; I have a DSU cabinet with PRI card installed. This PRI card is connected with an Alcatel PABX 4400 PRI card, both with qsig protocol.
When I make a call from Mitel to Alcatel the call is established but after 5 seconds it breaks; from Alcatel to Mitel everything is Ok.
The settings are; qsig version ISO, user side
Thanks !!

12

Mitel MiVoice Business/MCD/3300 / Mitel 3300 time/date

« on: March 12, 2018, 01:57:34 AM »

Hi,

I have an Mitel 3300 ICP 3300 ICP Call Control 38.0.11.6; every day the system generates the messsagess:
"Call Control - Security Local date/time reset to xxxxxxx 23:59:04.00    SUN by ESM User."
"Compute Hub Sp - System time successfully updated."

I tried to set-up an NTP server or time server but no result; the messagess are present every day.

Thanks a lot !

13

Mitel MiVoice Business/MCD/3300 / Re: 3300 mxe did

« on: February 26, 2016, 12:29:57 AM »

The problem has been solved.
Thanks a lot anyway !!

14

Mitel MiVoice Business/MCD/3300 / 3300 mxe did

« on: February 16, 2016, 02:07:02 AM »

Hi,

I encountered next situation:

I have a PRI link from  a provider;  the did range is 0374599400-599; in my PBX the internal numbers are from 4400 to 4599. the provider sends to PBX last 3 digits
the numbers from 4500 to 4599 can be accessed from outside but the numbers from 4400 to 4499 cannot  be accessed. (message from PBX, this number does not exist)
I have set up a speed call table so all numbers from  400-599 are send to 4400-4599.
Thanks a lot !!