Show Posts
1
SIP On Mitel / Re: 5330 Handsets and SIP configuration
« on: January 16, 2014, 06:20:09 AM »
Really struggling here i've got to the stage where i've got the SIP firmware on it not sure if its "fully loaded" as everytime I goto webpage it asks for TFTP address and can't get full interface as per manual.
Basically it pulls the cfg files from my TFTP server but I dont seem to be able to register with gradwell's sip server's here's what i've tried:
<user_list>
<User State="1" ID="7201XXX" DispName="01432 XXXXXX" Pwd="password" AuthName="7201XXX” Realm="" RegSvr="sip.gradwell.net" RegPort="5060" RegScheme="2" ProxySvr="nat.gradwell.com" ProxyPort="5082" ProxyScheme="2" VMSvr="" VMPort="5060" VMScheme="2" OutSvr="" OutPort="5060" OutCtr="0" Ring="1" Line="0" EventSvr="" EventPort="5060" EventScheme="2" NatMode="2" NatType="3" NatIp="0"></User>
</user_list>
I've tried fulling in OutSvr, playing with NAT but everytime the phone boots eventually it comes up with *NO REG* in the top corner.
Any ideas as i'm pulling my hair out on this!
Basically it pulls the cfg files from my TFTP server but I dont seem to be able to register with gradwell's sip server's here's what i've tried:
<user_list>
<User State="1" ID="7201XXX" DispName="01432 XXXXXX" Pwd="password" AuthName="7201XXX” Realm="" RegSvr="sip.gradwell.net" RegPort="5060" RegScheme="2" ProxySvr="nat.gradwell.com" ProxyPort="5082" ProxyScheme="2" VMSvr="" VMPort="5060" VMScheme="2" OutSvr="" OutPort="5060" OutCtr="0" Ring="1" Line="0" EventSvr="" EventPort="5060" EventScheme="2" NatMode="2" NatType="3" NatIp="0"></User>
</user_list>
I've tried fulling in OutSvr, playing with NAT but everytime the phone boots eventually it comes up with *NO REG* in the top corner.
Any ideas as i'm pulling my hair out on this!
