Mitel Forums - The Unofficial Source

Mitel Forums => Non-Mitel Chatter => Topic started by: Gasmanz on July 21, 2016, 08:15:37 PM

Title: Plantronics Savi 700 series
Post by: Gasmanz on July 21, 2016, 08:15:37 PM

Has anyone been able to get the base of the Plantronics Savi 700 series to connect via bluetooth to a Mitel 5330/5340/5360 bluetooth module?

When you do the pairing they see each other and the Mitel phone is asked to put in a pass code which is meant to be 0000 but upon authentication it says invalid code. I have tried 1234 and blank but they don't work either  :'(

Any help would be appreciated  :)

Title: Re: Plantronics Savi 700 series
Post by: PC77375 on August 29, 2016, 03:46:18 PM

Confused- why are you pairing the base to the bluetooth phone module? They connect via cable, as far as I know. I have a Savi 740 in my possession and can test as well, if you let me know what method you have used.

Title: Re: Plantronics Savi 700 series
Post by: Gasmanz on November 23, 2016, 03:32:00 PM

This is for EHS. When using the cable you need a lifter which is ugly  :D

Title: Re: Plantronics Savi 700 series
Post by: lundah on November 28, 2016, 08:01:14 AM

Quote from: Gasmanz on November 23, 2016, 03:32:00 PM

This is for EHS. When using the cable you need a lifter which is ugly  :D

For the 53xx series sets, you need to use a lifter for anything except the Mitel brand headsets.