Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: vorlander on July 05, 2008, 09:31:25 AM
-
Hi, can anyone help me in loudspeaker configuration on the 3300?
I have follow the instruction in the help, but when i insert the FAC for the paging, on the display's phone appear: NOT ALLOWED.
I already verify that the option "access to all zone" is enabled on the telephone's COS.
Can you help me?
Thank you
-
Also in your Class of Service that you have the following enabled on your phone:
Group Page - Allow
On the receiving phone:
Group Page - Accept
This should work
-
I know this is silly but if I don't mention it I may regret it later:
Be sure you're not trying to page using the speaker phone. You'll get the same error.
Ralph
-
no, i'm not using the phone.
I want to use a paging unit connected to the "pager" port on rear of the cx.
-
no, i'm not using the phone.
I meant that when you page, be sure to pick up the handset. Otherwise you will get the same error.
Ralph
-
How did you build the paging zones?
Try building it as zone 0 and see what that does.
-
Excuse me for the late...
The problem was that the FAC for Loudspeaker Paging doesn't work with handsfree...
thank you to all