Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: teezeike on July 29, 2009, 08:38:05 AM

Title: How to Get Cordless Handset to work with 5330 or 5430
Post by: teezeike on July 29, 2009, 08:38:05 AM
Hi All,

I have properly installed the cordless module on either of these phones. Put in the jumper as required and there appear to be no communication with the set and the handset. Is there anything to setup in the admin for this to work? I have tried to get this to work but as soon as I have installed the module the off-hook and on-hook botton wont respond???
Title: Re: How to Get Cordless Handset to work with 5330 or 5430
Post by: Mitel100 on July 29, 2009, 01:56:02 PM
Have you paired the devices?
Title: Re: How to Get Cordless Handset to work with 5330 or 5430
Post by: bobcheese on July 29, 2009, 04:26:46 PM
extract from 5340 manual on pairing:

Pairing a Cordless Accessory with the Cordless Module
To pair a cordless accessory:
1. Ensure that the battery of the cordless device to be paired is at least partially charged.
2. Press and hold down the pairing button on the back of the Cordless Module (see Figure 2
on page 106) for 5 seconds to activate telephone pairing mode. The LED on the Cordless
Module blinks. The Cordless Devices application opens on the telephone and prompts
you to
Title: Re: How to Get Cordless Handset to work with 5330 or 5430
Post by: ralph on November 08, 2011, 07:24:35 PM
I thought I'd update this so I've added a page, including a video on how to pair a Mitel Wireless Headset.

You can see the page here:  How to pair a Mitel wireless headset (http://www.mitelforums.com/articles/how-to-pair-headset.php)