Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: reval on April 22, 2012, 07:12:08 AM
-
Hi all,
as you're well aware when you use "alarms" command and system shows 5 line alarms it mean there are 5 analog lines or IP phones are in manbusy state,
How can I find extensions that are in Locked out state at the moment ?
Thank You All Experts In Advance
-
Try the "show faults" command.
i.e. Show fault lines
That should narrow it down to the card. Then you can stat the card.
Ralph