Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: godfather007 on March 18, 2012, 04:22:19 AM
-
Hi there,
newbie here.
Looking for an answer how to convert 5330 (http://www.mitelforums.com/store/mitel-5330.php) unit from MiNET to SIP protocol.
Just bought a bunch of units for the overseas family of my wife to connect to an elastix VM.
5 of them are 5212 (which can be converted when pressing *7 during boot).
Just the one more "luxurous" model 5330 (http://www.mitelforums.com/store/mitel-5330.php) is giving me headache. Under "phone-mode" i can only select MiNET or teleworker.
I just hope there's a way to upgrade to the SIP-firmware (where is that one located anyway??/found an external link for 5112).
I was stupid to select this fancy one, maybe i can return it it was only 30€.
Thanks in advance.
Martijn
NL
-
If you boot the phone up normally, and then hold down the up and down key, release the down key, and whilst still holding the up key press 234.
This will take you in to the phone config mode. Press # until you get to phone mode, then press *, press * for protocol, and then * to change. It will then ask you to reboot.
Once rebooted you need to grab a web browser and go to the ip address of the phone. login will be admin/5330.
From there you can put the registration details of the elastix box in.
-
Geez thanks Martyn!
I hope this will fix the issue, i gave up hope already. I'll try at home and post it here.
Greetings from Martijn
-
Hi,
back again. Unfortunately i cannot select SIP when i arrive to that menu-option (phone-mode).
I'm only able to select "teleworker" and then i have to select the teleworker gateway and reboot.
Even though i found that option before, i tried it this morning again and the machine did not find an tftp-server thus rebooted.
Could it be that the gateway-ip is in fact a TFTP server with a possible SIP firmware available for download?
Or should i give up and accept the fact that this device is not SIP capable? I've read about dual-mode devices.
Martijn
-
And.... back again..
so far no luck... followed a guide : http://www.voip-info.org/wiki/view/Mitel+MiNET+to+SIP+Conversion
But it's simply not working for this one 5330... my other phones 5212 are up2date with the following package http://www.voip-info.org/wiki/view/Mitel+SIP+Firmware
I can see that the unit 5330 is stuck at 01.01.00.09 version and is trying to find <L2Boot_5340.bin> <BootIp5340.bin> & <MinetIp5340.bin> which i don't have.
MitelOnLine needs annual fee of 250$ .... sad story...
-
On my 5340 I hold the 9 key while booting. It then ask if you want to set up Network Parameters.
Say 'No' until you get to phone mode. Say yes.
You can change it there.
Ralph
-
I have tried both methods listed above on both a 5360 and 5330 at my desk and I can change both to SIP. Once you get to Phone Mode press *, the you see Protocol - Press *, then it says Phone Mode: Minet - * to change, 0 = SIP, # to accept, * to store changes, then * to reboot then phone. Now I have to put my phone back in Minet, all for a good cause if it helps you.
-
Have to try the 9 key still .. but have the feeling that i will come to the point where 2 modes are possible: MINET vs TELEWORKER.
I have a feeling this could have something to do with the old current firmware 01.01.00.09 (?) or main program /loader.
Isn't there someone who could extract those files from their ICP3300?
I'll try the 9 tomorrow.
Martijn
-
Martijn,
I think the simplest thing would be to use the 7 key to put the phone in teleworker mode, pointing it at an MBG running a newish load so the set can tftp new firmware. Once you have new f/w, then you can go through the steps of putting it in SIP mode.
try 216.191.234.113, very new MBG.
Hopefully it isn't too far a jump in versions, that would be my only worry.