Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: akuhn on January 25, 2012, 01:00:51 PM

Title: Phone system (Mitel 5000) can't find Exchange Server for UM
Post by: akuhn on January 25, 2012, 01:00:51 PM

Cross Posted in Applications

We changed ISPs on Friday and added a Layer 2 Point to Point between my server room and my vendor's NOC.  My Network management company hosts my Exchange server, BES, and does other stuff for us.

My unified messaging on my 5000 was working fine for us before this.  We had a Sonicwall Point to Point VPN and VM could be delivered to Exchange.

No longer.  I validated the smtp address in the Mitel Admin console.  it's setup as a Name, not an IP address per Mitel's instructions.

My phone system is in my DMZ and I created a NAT policy between the phones and the exchange server in my regular server subnet.

No joy.

If this were a Windows box, I'd run an ipconfig /flushdns to refresh the dns of the machine and make it find the new location. 

Is there someplace else I need to check?  I looked at the web interface of the 5000 to look at logs in the VM section, and it indicates that VM can't be delivered, but it doesn't list the exact error. 

Or do I just reboot the 5000 at COB and see if that works?  I think it's going to be a routing issue, not a 5000 issue, but I just want to know all of the places to look.

Thanks for your suggestions.

Adam in DC

Title: Re: Phone system (5000) can't find Exchange Server for UM
Post by: akuhn on January 26, 2012, 09:23:21 AM

Some progress.  We created a NAT policy and an access rule and messages we delivered again.

However, I had to open all ports on the access rule.  Port 25 being open wasn't enough.  Anyone know what other ports are needed to deliver email to an exchange server?

Title: Re: Phone system (5000) can't find Exchange Server for UM
Post by: ralph on January 26, 2012, 11:20:44 AM

Just guessing here but how about port 110?


Ralph

Title: Re: Phone system (Mitel 5000) can't find Exchange Server for UM
Post by: akuhn on January 26, 2012, 11:23:03 AM

We'll look into it.  Thanks!

Title: Re: Phone system (Mitel 5000) can't find Exchange Server for UM
Post by: akuhn on January 30, 2012, 09:43:41 AM

Just heard from Mitel and they agree that this is an important question since more and more folks are outsourcing Exchange.  The tech I spoke with also said that it's very hard to find the answer!

But, they suggested starting with ports 25 for smtp, TCP port 143 for Non encrypted and 993 for encrypted.

I think I should also look at the exchange mailbox properties for vismail (that's the account name user) and see what's enabled and disabled.  I think imap needs to be enabled.

Title: Re: Phone system (Mitel 5000) can't find Exchange Server for UM
Post by: akuhn on January 30, 2012, 12:10:24 PM

Success!  To summarize:

25 - SMTP
TCP 143
TCP 993
both IMAP

Then on the exchange server, I enabled MAPI and IMAP for the email box vismail and disabled everything else.  Hope this helps someone else in the same situation.

Title: Re: Phone system (Mitel 5000) can't find Exchange Server for UM
Post by: ralph on January 30, 2012, 01:39:37 PM

Thanks for the update.  That was worth tweeting!   :)

Ralph