Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: dh_lab on October 30, 2011, 06:06:19 AM

Title: Mitel e2t MAC Address
Post by: dh_lab on October 30, 2011, 06:06:19 AM

hi all,
how can check the e2t card mac with command prompt.

thanx

Title: Re: e2t
Post by: ralph on October 30, 2011, 07:46:20 AM

Some systems have the MACs on a sticker on the back of the controller.   Look there first.

I don't have my notes with me but try 'showArp'.

Ralph

Title: Re: Mitel e2t MAC Address
Post by: dh_lab on October 31, 2011, 12:00:47 AM

"showArp" command not available

Title: Re: Mitel e2t MAC Address
Post by: brantn on October 31, 2011, 12:30:20 AM

Yes sticker on the controller is the fastest for sure. Can you not get into the controller at all?

Title: Re: Mitel e2t MAC Address
Post by: bobcheese on October 31, 2011, 03:00:59 AM

Is it not in the 'system hardware compute' form?

Title: Re: Mitel e2t MAC Address
Post by: ralph on October 31, 2011, 07:41:49 AM

Quote

Is it not in the 'system hardware compute' form?

Thanks, Bobcheese.
Didn't realize that was there.

Ralph

Title: Re: Mitel e2t MAC Address
Post by: brantn on October 31, 2011, 09:38:43 AM

That is why I was asking if he can't get into the system at all then you don't need vxworks' commands.

Title: Re: Mitel e2t MAC Address
Post by: dh_lab on November 10, 2011, 08:48:39 AM

Thank you all,
 i found MAC with the lease of dhcp