Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ralph on July 19, 2011, 08:32:59 AM

Title: Mitel 3300 Uptime
Post by: ralph on July 19, 2011, 08:32:59 AM

Every once in a while I learn a new command that's useful to me.
So I just thought I'd share.

Command:  UPTIME
Example Results:       Uptime: 8:28 up 419 days, 5:55:16

Shows how long the controller has been active.


Ralph

Title: Re: Mitel 3300 Uptime
Post by: bobcheese on July 19, 2011, 08:41:06 AM

Cheers Ralph, is this a ESM or Shell command?

Title: Re: Mitel 3300 Uptime
Post by: ralph on July 19, 2011, 09:20:53 AM

ESM.
Don't know how I've overlooked this one.
It at least works in 4.2.   Don't know if it worked in earlier versions.

Ralph

Title: Re: Mitel 3300 Uptime
Post by: lavrai on July 20, 2011, 02:07:42 PM

Quite a few new Maintenance commands added into ESM in the last few releases:
PS
SAStats

Maybe congestion?

Title: Re: Mitel 3300 Uptime
Post by: ralph on July 20, 2011, 02:46:30 PM

congestion has been there since the mid SX2000 days.
Don't know if it made it into ESM right away but you could get to it via telnet.

Ralph

Title: Re: Mitel 3300 Uptime
Post by: Kurt on July 23, 2011, 09:44:54 AM

uptime has been a RTC Maintenance command for a long time, so glad they added it to the ESM Commands!!