Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: gimitel on January 24, 2011, 03:55:30 PM

Title: Upgrade 3300 ICP CXi from Rel 9.0 to MCD4.1 and keep all the Licenses
Post by: gimitel on January 24, 2011, 03:55:30 PM
Guys,

I posted a topic a few days ago, how to upgrade an 3300 ICP Cxi from Rel 9.0 to MCD 4.1 without lossing all the licenses that i have on the system.
I wrote down few steps i think need to be done for this upgrading, can someone check these steps for me!

Step 1: Backup the database from the current configuration
Step 2: Upgrade software rel 9.0 to mcd 4.0 using the softwaretool (check option full install)
Step 3: Loging into the ICP and do a database restore
Step 4: Reboot the ICP
Step 5: Upgrade software mcd 4.0 to mcd 4.1  using the softwarertoot (check option software upgrade)

Can some tell me if these steps are ok or if there more action need to be taken ?

Many thanks,
Gimitel
Title: Re: Upgrade 3300 ICP CXi from Rel 9.0 to MCD4.1 and keep all the Licenses
Post by: ralph on January 24, 2011, 04:33:13 PM
I think before step 5 you have to do a migration precheck to be sure you database will migrate ok.

Ralph
Title: Re: Upgrade 3300 ICP CXi from Rel 9.0 to MCD4.1 and keep all the Licenses
Post by: brantn on January 24, 2011, 05:13:14 PM
Step 1 is correct.
Step 2 Can be and upgrade as well.
Step 3 Is unneeded if upgrade is done.
Step 4 Is unneeded if upgrade is done.
Step 5 Should be run Migration Precheck.
Step 6 Convert Database
Step 7 Upgrade to MCD 4.1

Also make sure the CXi has at 512 MB of memory otherwise you need a memory module.
Title: Re: Upgrade 3300 ICP CXi from Rel 9.0 to MCD4.1 and keep all the Licenses
Post by: gimitel on January 25, 2011, 08:45:04 AM
Guys,

Thanks for replying.
This is the first time i am going to do an upgrading.
I figured out how to de the "migration recheck" (by maintenance command)
But how to convert the database? before upgarding from 4.0 to 4.1 ?

Thanks,

Gimitel
Title: Re: Upgrade 3300 ICP CXi from Rel 9.0 to MCD4.1 and keep all the Licenses
Post by: bluewhite4 on January 25, 2011, 10:56:56 AM
You have to go into the SDS form, and at the top, there is a button to convert the database.
Title: Re: Upgrade 3300 ICP CXi from Rel 9.0 to MCD4.1 and keep all the Licenses
Post by: brantn on January 25, 2011, 12:04:59 PM
Also to note is this a networked setup. I would suggest getting a copy of the technicians handbook.
Title: Re: Upgrade 3300 ICP CXi from Rel 9.0 to MCD4.1 and keep all the Licenses
Post by: limamikeseven on January 26, 2011, 03:07:11 AM
The technicians handbook as well as the release notes explain this very well. If you do not have SDS forms you will have to enable System Data Synchronization in system options form before the forms will show.