Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: hsearson on January 14, 2011, 04:36:52 PM

Title: sx200 mitel express messenger
Post by: hsearson on January 14, 2011, 04:36:52 PM
how do you log into this card using the Express Manager 4.11 application? The version is an earlier version, maybe rel2 or earlier. Manager 4.11 only has options for a dial up modem connection, isnt it possible to connect directly to the card? And is there a specific cable type that I would need?

Thanks
Title: Re: sx200 mitel express messenger
Post by: Ray B on February 03, 2011, 04:54:27 PM
I use a RS232 DB9 null modem cable and Mitel Express Manager. If the serial port on the Express Messenger card is used for PMS intregration you'll need to login to the TUI (system admin mailbox) and change it to express manager. If you have to change it be careful to note what protocol the PMS interface is using there are two choices, Hyatt Encore and HIS Property Management Systems so you can change it back after you make the needed programming changes. 

1. Access the System Administrator