Mitel Forums - The Unofficial Source
Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: Crowtalks on January 04, 2018, 04:52:00 PM
-
I was looking at one of my systems and I noticed under System - Trunk Related Info - Call Routing Tables- Call Routing key, it shows an option for Outside Party Number. F1 says this routes the calls according to calling party CLID instead of called number CLID.
Where would a person populate that info in the system?
Jim
-
In the associated Call Routing Table, same as routing by DID.
-
Instead of a DDI you would enter the outside parties CLI and route accordingly.
Enter the E and + at the bottom routing to your normal Call Routing Tables.
Set the Day or Night Destination on your trunk groups to route to this Call Routing Table.
-
This is commonly used to block problem numbers. You just route the call to a CRA to hang up.