Author Topic: Mite 3300 hyper terminal (serial cable)  (Read 3060 times)

Offline MarwanNugdalla

  • Contributer
  • *
  • Posts: 7
  • Country: sd
  • Karma: +0/-0
    • View Profile
Mite 3300 hyper terminal (serial cable)
« on: April 23, 2017, 03:41:00 PM »
Hi All,

Can someone send me the pin diagram of the hyper terminal ( serial.cable)... I have a problem with my controller and it seems like no way to upload new software by normal way.

Really thanks for your quick support.

Thanks
Marwan


Offline VinceWhirlwind

  • Hero Member
  • *****
  • Posts: 899
  • Country: au
  • Karma: +31/-0
    • View Profile
Re: Mite 3300 hyper terminal (serial cable)
« Reply #1 on: April 23, 2017, 06:59:17 PM »
It's a null modem cable.

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Mite 3300 hyper terminal (serial cable)
« Reply #2 on: April 23, 2017, 11:07:17 PM »
The cable is a standard straight through 9-pin serial cable. 9600 8N1

That said, you cannot upload software though it, that still occurs via a network FTP connection, but you can adjust the boot parameters to pull the files from a specific location. Note that this will wipe the database and license key, you have to restore it manually.

Offline MarwanNugdalla

  • Contributer
  • *
  • Posts: 7
  • Country: sd
  • Karma: +0/-0
    • View Profile
Re: Mite 3300 hyper terminal (serial cable)
« Reply #3 on: April 24, 2017, 06:16:32 AM »
Hi guys,

I tried to make this cable many times and the result was i can see the booting sequence for the controller but i can not press the space space space to the booting of the controller... i found a lot of the pin diagram of the null serial cable and i will appreciate if you share with me the correct pin out.

thanks
Marwan   

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Mite 3300 hyper terminal (serial cable)
« Reply #4 on: April 24, 2017, 11:52:56 AM »
Hi guys,

I tried to make this cable many times and the result was i can see the booting sequence for the controller but i can not press the space space space to the booting of the controller... i found a lot of the pin diagram of the null serial cable and i will appreciate if you share with me the correct pin out.

thanks
Marwan
It is not a null modem cable... It is an industry standard 9-pin straight through RS-232 cable.

M-F
1-1 (DCD)
2-2 (Rx)
3-3 (Tx)
4-4 (DTR)
5-5 (Signal Ground)
6-6 (DSR)
7-7 (RTS)
8-8 (CTS)
9-9 (This is the Ring In Indicator and is not used for this application, it can be skipped if you are using RJ45-RS232 modular adapters)
G-G (Cable Ground, not essential)

That is all there is to it, nothing special... In theory, only pins 2, 3, and 5 are required by the controller, although Hyperterminal may not work right without the others, Tera Term doesn't care as long as you turn off flow control.

I also recommend using TeraTerm and not Hyperterminal. https://ttssh2.osdn.jp/index.html.en
« Last Edit: April 24, 2017, 11:57:20 AM by acejavelin »

Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mite 3300 hyper terminal (serial cable)
« Reply #5 on: April 25, 2017, 07:38:46 AM »
In the old days, back when everything was DB25, I always strapped 4-5 together, then 5,8,20.  I did this on both ends.  Then for a null cable I'd just swap 2&3.
(I'm repeating that by memory so don't trust it)

I'm thinking in your case you may want to strap CTS and RTS together on both ends.

Ralph


 

Sitemap 1 2 3 4 5 6 7 8 9 10