Author Topic: Guest Room Phones Blink, Will not ring  (Read 1197 times)

Offline mattcrocker

  • New Member
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Guest Room Phones Blink, Will not ring
« on: December 16, 2016, 10:26:01 AM »
New to Mitel but almost all of my hotel clients have them, this just started happening,  when the front desk calls a room, the phones blink. They do not ring. Replaced the Superconsole 1000 and no alarms on the system.  Where should I look??


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Guest Room Phones Blink, Will not ring
« Reply #1 on: December 16, 2016, 04:58:34 PM »
what kind of system?
What kind of phones?

Ralph

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Guest Room Phones Blink, Will not ring
« Reply #2 on: December 16, 2016, 08:39:15 PM »
First off, unless this is an old floppy disk based system, reboot... then narrow it down. Is it all rooms or just a block of 12/16/24 (depending on system size)... if all rooms, your power supply for that cabinet is likely faulty, if it's a block of rooms, I would bet they can be isolated to a single station card.

The 200 isn't very complicated, and unless your region changed somehow (not sure that would even do it) it isn't a software issue, it's hardware, but without more information that is about all I can tell you.


 

Sitemap 1 2 3 4 5 6 7 8 9 10