Author Topic: Plantronics Savi 700 series  (Read 3039 times)

Offline Gasmanz

  • Jr. Member
  • **
  • Posts: 37
  • Country: nz
  • Karma: +1/-0
    • View Profile
Plantronics Savi 700 series
« on: July 21, 2016, 08:15:37 PM »
Has anyone been able to get the base of the Plantronics Savi 700 series to connect via bluetooth to a Mitel 5330/5340/5360 bluetooth module?

When you do the pairing they see each other and the Mitel phone is asked to put in a pass code which is meant to be 0000 but upon authentication it says invalid code. I have tried 1234 and blank but they don't work either  :'(

Any help would be appreciated  :)


Offline PC77375

  • Full Member
  • ***
  • Posts: 189
  • Country: us
  • Karma: +6/-0
    • View Profile
Re: Plantronics Savi 700 series
« Reply #1 on: August 29, 2016, 03:46:18 PM »
Confused- why are you pairing the base to the bluetooth phone module? They connect via cable, as far as I know. I have a Savi 740 in my possession and can test as well, if you let me know what method you have used.

Offline Gasmanz

  • Jr. Member
  • **
  • Posts: 37
  • Country: nz
  • Karma: +1/-0
    • View Profile
Re: Plantronics Savi 700 series
« Reply #2 on: November 23, 2016, 03:32:00 PM »
This is for EHS. When using the cable you need a lifter which is ugly  :D

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1153
  • Country: us
  • Karma: +62/-0
  • Senior Chief Grunt
    • View Profile
Re: Plantronics Savi 700 series
« Reply #3 on: November 28, 2016, 08:01:14 AM »
This is for EHS. When using the cable you need a lifter which is ugly  :D

For the 53xx series sets, you need to use a lifter for anything except the Mitel brand headsets.


 

Sitemap 1 2 3 4 5 6 7 8 9 10