Author Topic: Cisco Port-Security and Mitel UC360 Conference Phones  (Read 1673 times)

Offline Kjvance1

  • New Member
  • *
  • Posts: 4
  • Country: gb
  • Karma: +0/-0
    • View Profile
Cisco Port-Security and Mitel UC360 Conference Phones
« on: February 05, 2016, 08:17:18 AM »
Hi,

Has anyone had an issue with getting the Mitel UC360 to work on switchports configured with port security ?

We have had several cases where UC360s are plugged in and powered up, but we see nothing incoming from the UC360 in packet captures.

In each case we remove port security, and bounce the port then the UC360 starts sending traffic . Also in each case if we then shut the port, reinstate port security the UC360 appears to stop sending traffic. This behaviour is consistent.

Has anyone had issues with setting up these devices on Cisco 2960 POE switches?


Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: Cisco Port-Security and Mitel UC360 Conference Phones
« Reply #1 on: February 07, 2016, 04:33:31 PM »
Can you post a copy of the config on the port when it doesn't work?


 

Sitemap 1 2 3 4 5 6 7 8 9 10