« previous next »
Pages: [1]   Go Down

Author Topic: 3300 paging zones  (Read 1695 times)

Offline johnlowe

  • Contributer
  • *
  • Posts: 16
  • Country: ca
  • Karma: +0/-0
    • View Profile
3300 paging zones
« on: January 26, 2015, 09:23:12 PM »
Hello,

I would like to create few paging zones since we have loudspeaker, how do I program paging zones in the PBX?
Once paging zones is setup, how do I set location A for zone 1, location B for zone 2 and location C for zone 3? Is this setup in paging amplifier?


Thank you
 
Logged

Offline mszodiac

  • Sr. Member
  • ****
  • Posts: 232
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: 3300 paging zones
« Reply #1 on: January 27, 2015, 12:21:04 PM »
How many amplifiers do you have?

The way we've set it up is one amplifier to one paging unit.  The amplifiers themselves are installed on certain locations on the premises (ie. public zone).  Then we just setup paging access codes to whichever phone requires paging services.
Logged

Offline johnlowe

  • Contributer
  • *
  • Posts: 16
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: 3300 paging zones
« Reply #2 on: January 27, 2015, 06:44:31 PM »
Just one amplifier.
Can one amplifier have multiple zones?
Logged

Offline mszodiac

  • Sr. Member
  • ****
  • Posts: 232
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: 3300 paging zones
« Reply #3 on: January 28, 2015, 08:38:34 AM »
The docs show one paging unit can be setup with multiple zones but we could not get ours to work as such...
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10