Mitel 430 setup

[gpais70]

430 should have 2 built in DSP's I believe.

Hi

Please see the info bellow:

Regards

Enviado do meu ALE-L21 através do Tapatalk

[gpais70]

No on board DSP on the 430?

I can see you have resources allocated to DECT and Audio in your screen capture.

On the 430

Enviado do meu ALE-L21 através do Tapatalk

[gpais70]

No on board DSP on the 430?

I can see you have resources allocated to DECT and Audio in your screen capture.

On the 430

Enviado do meu ALE-L21 através do Tapatalk

Hi

No DSP card on the 430. The licence in use as 729.G codec.

Enviado do meu ALE-L21 através do Tapatalk

[gpais70]

No on board DSP on the 430?

I can see you have resources allocated to DECT and Audio in your screen capture.

On the 430

Enviado do meu ALE-L21 através do Tapatalk

Hi

No DSP card on the 430. The licence in use as 729.G codec.

Enviado do meu ALE-L21 através do Tapatalk

Aastra 5380 internal call (Circuit overload). How to sort?

Enviado do meu ALE-L21 através do Tapatalk

[Jan]

Sorry für German Docs

You need no Voip From DSI/FXS/BRI/Voicemail vice versa.

From IP(SIP)/ VOIP Phones 68xx/53xxIP to DSI/FXS/BRI/Voicemail you need a voip channel.

If you don´t use System Dect you can configure it as :



Use g.711 only so you can get more channels on onboard DSP. This setting does not affect the Voicemail codings.

you should add a dspx1 modul for more resources since the build in is quite limited.

greetings Jan

[gpais70]

Sorry für German Docs

You need no Voip From DSI/FXS/BRI/Voicemail vice versa.

From IP(SIP)/ VOIP Phones 68xx/53xxIP to DSI/FXS/BRI/Voicemail you need a voip channel.

If you don´t use System Dect you can configure it as :



Use g.711 only so you can get more channels on onboard DSP. This setting does not affect the Voicemail codings.

you should add a dspx1 modul for more resources since the build in is quite limited.

greetings Jan

Hi Jan

Thank you for the help.
See the the picture from my MVO after renewal of the license.
The scenario is:
Income/autogoing calls only the receptionist allowed.
Users only internaly calls

I am not sure if is my mistake doing configurations but was working before new  license.

Did you have any demo of procedures for calls:

Germano

Enviado do meu ALE-L21 através do Tapatalk

[bojo387]

Click on down arrow for DECT, choose blank. Afterward, see if you can then assign any to VoIP. If you don't need GSM, do the same. Click on down arrow, change the value to blank and assign to VoIP. (you need to restart after changing DSP settings)

[gpais70]

Click on down arrow for DECT, choose blank. Afterward, see if you can then assign any to VoIP. If you don't need GSM, do the same. Click on down arrow, change the value to blank and assign to VoIP. (you need to restart after changing DSP settings)

Hi

I did the procedures it still not working.
Is this MVO can work without licence?
This device not have dsp module inside.
I don't understand why not working with new licence. It was "active".
See the picture.

Germano

Enviado do meu ALE-L21 através do Tapatalk

[bojo387]

That message means what you have licensed is more than what is configured and/or available. You still did not assign any channels to VoIP after removing them from the DECT and GSM. You added more to Audio instead. Please assign channels under VoIP.

[gpais70]

That message means what you have licensed is more than what is configured and/or available. You still did not assign any channels to VoIP after removing them from the DECT and GSM. You added more to Audio instead. Please assign channels under VoIP.

Hi

Please see the picture bellow.
I assigned to VoIp already. Now the the calls not coming in or outgoing.
I am not sure is something have to change in routing?

Regards


Enviado do meu ALE-L21 através do Tapatalk

[gpais70]

That message means what you have licensed is more than what is configured and/or available. You still did not assign any channels to VoIP after removing them from the DECT and GSM. You added more to Audio instead. Please assign channels under VoIP.

Hi

Please see the picture bellow.
I assigned to VoIp already. Now the the calls not coming in or outgoing.
I am not sure is something have to change in routing?

Regards


Enviado do meu ALE-L21 através do Tapatalk

Hi Bojo

I would like to reset all configurations on this device than upgrade to new version. Is correct idea? consequences? The version available is 4.

Let me know the procedures-for it.

Regards


Enviado do meu ALE-L21 através do Tapatalk

[bojo387]

You do not need to reset the configuration to upgrade. (Note that you need a valid license number or license file depending on the version you are upgrading to.)

There is no issue doing a reset or first start... provided, you are trained and know what to do. If you plan to configure the system from scratch again, I do not think it is practical to get the guidance you need purely via the forum if you do not have the foundational knowledge of the product yet. The forum can help, but should not be your only source of instruction. This is just my personal opinion.

For your issues, you can check the event log under system events... what alarms are there? You can also use the built-in system traces to further troubleshoot what is happening.

[gpais70]

You do not need to reset the configuration to upgrade. (Note that you need a valid license number or license file depending on the version you are upgrading to.)

There is no issue doing a reset or first start... provided, you are trained and know what to do. If you plan to configure the system from scratch again, I do not think it is practical to get the guidance you need purely via the forum if you do not have the foundational knowledge of the product yet. The forum can help, but should not be your only source of instruction. This is just my personal opinion.

For your issues, you can check the event log under system events... what alarms are there? You can also use the built-in system traces to further troubleshoot what is happening.

Hi Bojo

Please the messages and revert.

Enviado do meu ALE-L21 através do Tapatalk

[bojo387]

What is the existing problem you are having?

[gpais70]

What is the existing problem you are having?

Hi

Calls problems, no calls in or out.
The routing.
I not sure if is correct, but before the new licence it was working.
The line is connected in port 1.1


Enviado do meu ALE-L21 através do Tapatalk