Author Topic: incoming DID programing  (Read 1326 times)

Offline mynnattor

  • Contributer
  • *
  • Posts: 8
  • Country: us
  • Karma: +0/-0
    • View Profile
incoming DID programing
« on: November 07, 2017, 04:56:30 PM »
i need to program an incoming DID on an sx-200 to go directly to the main greeting, the DIDs match the extensions but i need another number to fall in, there is nothing in the digit translation table because i am receiving 4 digits from the carrier. i could create a phantom extension and put it in DND..... any ideas?


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: incoming DID programing
« Reply #1 on: November 07, 2017, 07:59:18 PM »
Are you going to the "normal" auto attendant of Embedded/Express VM? Typically you would program nothing and in form 19 for the tenant of the trunks, send DID Vacant Number Routing to the VM hunt group.

It might be worth it to consider reprogramming this to make use of the DID Assignment form, it is pretty easy, you can build Form 55, then after everything looks good, just change the insert digits on the trunks and this will never be a problem again.


 

Sitemap 1 2 3 4 5 6 7 8 9 10