Author Topic: Replacement MGU, faulty or not? MX-One 5.0 SP5 build28  (Read 1695 times)

Offline martinnyberg_mtel

  • New Member
  • *
  • Posts: 2
  • Country: fi
  • Karma: +0/-0
    • View Profile
Replacement MGU, faulty or not? MX-One 5.0 SP5 build28
« on: July 20, 2017, 02:30:10 AM »
Hi everybody!

I've recently received a replacement MGU (Media Gateway Unit) for our MX-system but I can't figure out why it wont work properly.
I've configured the MGU trough the USB-interface accordingly to Mitels manuals, but it keeps rebooting and when connected to it, gives out the following message (seen below).
System restarts / "hardware" reboots haven't helped either.

Has anybody seen this before? Is the replacement board faulty, what do you reckon?



Message from syslogd@localhost at Mon Jul  3 14:31:48 2017 ...
localhost MGU: 35386 FATAL MCA : [4635]  file: src/main/MediaControlApplication.cpp line: 849 : Failed initializing MSP: VAPI_BootDevice failed

Message from syslogd@localhost at Mon Jul  3 14:31:48 2017 ...
localhost MGU: 35388 FATAL MCA : [4635]  file: src/main/MediaControlApplication.cpp line: 257 : Failed initializing MSP


EDIT, MGU-info:

-------------
        FPGA: 7.1.1
File system: 0.6.147
Application: mgw-1.6.27-1
      Kernel: 2.6.14.7-selinux1-WR1.4aq_cgl #2 PREEMPT Mon May 20 16:40:27 CEST 2013
        Boot: R2A
         MSP: Not obtainable (erimca not running)

Misc info
---------


If I use the command "mgu_loadmsp" I get the following message:

Please enter at least 1 argumentVAPI_Close: VAPI_Close: VAPI library not initialized.
VAPI_Close: VAPI_Close: VAPI library not initialized.
VAPI_Close: failed





Best Regards,
Martin Nyberg
« Last Edit: July 20, 2017, 02:58:00 AM by martinnyberg_mtel »


 

Sitemap 1 2 3 4 5 6 7 8 9 10